Monitoring fuel quality: a case study for quinizarin marker content of unleaded petrol marketed in Greece

Fuel adulteration and cross-contamination lead to low-quality fuel products, which may cause increased environmental pollution, loss of taxes and engine problems. An establishment of a quality monitoring mechanism based on laboratory measurements may reveal problematic areas of the fuel supply chain. For the purposes of this work, 97 unleaded petrol samples were measured in order to quantify mass concentration of quinizarin, a substance used in Greece to easily mark the presence of 95 Research Octane Number unleaded petrol in other types of automotive fuels. The samples were obtained from petroleum retail stations selling different brands of fuels and located in different geographic regions of Greece. Statistical analysis of the results revealed quinizarin mass concentrations below the 3 mg L^?1 legislation specification limit and significant differences between brands and geographic regions, which may attributed to the structure of the fuel supply chain in Greece in combination with quinizarin properties and way of handling. Moreover, certain approaches were used for the calculation of decision limits for assessing compliance or non-compliance. These approaches take measurement reproducibility or estimated in-house uncertainty into account, in order to minimize the probability of false rejection.     

Synthesis of thermally stable aromatic poly(spiroorthocarbonate)s having a Cardo or bent structure

Novel poly(spiroorthocarbonate)s [poly(SOC)]s having a Cardo or bent structure were synthesized by polycondensation of several bis‐catechols having fluorene (BCFL), spirobisindane (BCSPI), or spirobischromane (BCSPC) in the structure with 2,2,6,6‐tetrachlorobenzo[1,2‐d:4,5‐d’]bis[1,3]dioxole (4ClBD). Synthesis of poly(SOC)s was confirmed by NMR and IR spectrometry. The poly(SOC)s obtained from BCFL or BCSPC were soluble in common organic solvents. The glass transition temperature of the poly(SOC)s was not detected by differential scanning calorimetry (DSC) in the range of 50–300 °C. The 10 wt % decomposition temperature of the poly(SOC)s was found to be above 400 °C. These results indicated the high thermal stability of the poly(SOC)s. Soluble poly(SOC)s could be possessed to form a film on a glass plate by the spin coat method. The obtained polymer films were 0.2 μm in thickness with 95% light transmission in the optical wavelength range. These results suggested that the Cardo or bent structure may block the packing of the main‐chain of the structure, which improves the solubility of the polymers, increases transparency, and enhances the thermal stability of SOCs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1409‐1416     

Super-efficiency measurement under variable return to scale: an approach based on a new directional distance function

A modified super-efficiency model based on the directional distance function (DDF) has recently been developed in order to tackle the infeasibility issue in the two exceptions of the Nerlove–Luenberger (N–L) super-efficiency model under variable return to scale (VRS). However, we find that model does not fully eliminate the infeasibility issue. This paper chooses an appropriate reference bundle in the DDF so that the resulting DDF-based VRS super-efficiency model is always feasible. The proposed new model successfully addresses the infeasibility issue of conventional VRS super-efficiency models and fully eliminates the infeasibility issue in the two exceptions of the VRS N–L super-efficiency model. Additional advantages of the new model include: it is unit-invariant and does not need to predetermine any parameter. Theoretical analyses and numerical examples support the practicality and superiority of our model when compared with other super-efficiency models.     

Microtextures Induced by Nanosecond Laser on Ni–Co Alloy Coatings

Ni–Co alloys have a wide range of applications in various fields owning to their excellent physical, chemical, and mechanical properties. In this paper, we prepare Ni–Co alloy coatings on 316L stain steel surfaces by electroplating. We present a novel approach utilizing a nanosecond laser to induce microtextures on Ni–Co alloy coatings. We study experimentally the effects of laser power and scanning rate on the surface morphologies of Ni–Co alloy coatings. The results indicate that the shape and size of induced microtextures can be controlled by the laser power and scanning rate. The size of grains increases with increase in the work current of the laser (WCL) at a certain scanning rate. With the WCL constant, the size of grains decreases with increase in scanning rate while their average height increases. It is a simple and easily-controlled method for the fabrication of microstructures on Ni–Co alloy coatings, which has promising applications in investigations of the properties of microtextured surfaces, such as friction, adhesion, and wetting.     

In situ ultrasonic measurements: a powerful tool to control the synthesis of zeolites from coal fly ash

An in situ ultrasonic diagnostic technique was applied to monitoring the hydrothermal synthesis of zeolite A and X of clear solution extracted from alkaline fused class F coal fly ash. In this context, kinetic evaluations based on in situ ultrasonic diagnostic data displayed an important approach to study the synthesis process. The impact on nucleation and crystal growth was demonstrated by variation of a few relevant parameters such as reaction temperature, amount of water, Na₂O and ageing time, including templated colloidal synthesis mixtures as model solution. To complement the kinetic analysis, ex situ techniques such as ICP, X-ray diffraction, scanning electron microscopy and dynamic light scattering were used to investigate liquid phase and reaction products extracted from the reaction mixture during the synthesis.